

ホーム

会社情報

製品

真空ホモゲナイザー

液体のホモジェナイザー

機械を作る歯磨き粉

マヨネージー製造機

化粧品の乳化剤のミキサー

高いせん断のミキサー

液体洗浄剤ミキサー

液体混合機

Ro 水処理機

ステンレス鋼の貯蔵タンク

梱包マヒシン

充填機

ラベル付け機

イベント

ニュース

事件

送信

引用

バナー

ニュースの詳細

ホーム > ニュース >

会社ニュース What are the key operating precautions for laboratory vacuum emulsifiers?

イベント

ニュース

事件

送信

Mrs. Samson Sun

yx011@chinayxjx.com

86--18665590218

今接触

What are the key operating precautions for laboratory vacuum emulsifiers?

2025-11-07

Safe and effective operation requires following these guidelines:

Pre-Operation Check: Ensure the vacuum system is leak-free, the homogenizer rotor is securely installed, and all safety guards are in place. Clean the mixing chamber thoroughly to avoid cross-contamination between batches.

Material Preparation: Cut solid materials into small pieces (to speed up dissolution) and pre-mix low-viscosity liquids (to reduce homogenization time). Avoid adding excessive solid particles directly, as this may damage the shear rotor.

Vacuum Application: Gradually increase the vacuum level (avoid sudden high vacuum) to prevent material splashing. Monitor the vacuum gauge during operation—if pressure rises unexpectedly, stop and check for leaks.

Speed Control: Start the homogenizer at a low speed, then gradually increase to the target speed (high-speed operation should not exceed the recommended duration to prevent overheating of the motor).

Post-Operation: Turn off the homogenizer first, then release the vacuum slowly. Clean the equipment immediately after use (use neutral detergents; avoid abrasive cleaners that scratch the chamber surface).

バナー

ニュースの詳細

ホーム > ニュース >

会社ニュース-What are the key operating precautions for laboratory vacuum emulsifiers?

イベント

ニュース

事件

What are the key operating precautions for laboratory vacuum emulsifiers?

2025-11-07

Safe and effective operation requires following these guidelines:

Pre-Operation Check: Ensure the vacuum system is leak-free, the homogenizer rotor is securely installed, and all safety guards are in place. Clean the mixing chamber thoroughly to avoid cross-contamination between batches.

Material Preparation: Cut solid materials into small pieces (to speed up dissolution) and pre-mix low-viscosity liquids (to reduce homogenization time). Avoid adding excessive solid particles directly, as this may damage the shear rotor.

Vacuum Application: Gradually increase the vacuum level (avoid sudden high vacuum) to prevent material splashing. Monitor the vacuum gauge during operation—if pressure rises unexpectedly, stop and check for leaks.

Speed Control: Start the homogenizer at a low speed, then gradually increase to the target speed (high-speed operation should not exceed the recommended duration to prevent overheating of the motor).

Post-Operation: Turn off the homogenizer first, then release the vacuum slowly. Clean the equipment immediately after use (use neutral detergents; avoid abrasive cleaners that scratch the chamber surface).

+8618665590218

SAIKESAISI水素エナジー

ホーム会社情報製品ニュース事件送信

迅速な連絡

住所

チェンナン経済開発区,江蘇県高雄市,中国

Tel

86--18665590218

電子メール

yx011@chinayxjx.com

+8618665590218

お問い合わせ

弊社製品についてのお問い合わせは、こちらで受付しております.

プライバシーポリシー規約 | 地図 | 中国の良質真空ホモゲナイザーメーカー。Copyright© 2025 Yangzhou Aipuweier Automation Equipment Limited Company . 複製権所有。